LIMAX3CP Shaft Information System Lift Positioning with Safety Functions for hoisting heights up to 260 m

Safe, absolute position detection up to 260 m and safety-relevant switching and control functions in one housing
High cost savings due to the reduction of components
Up to 3 pairs of safety relays and up to 13 safe inputs for SIL3 compliant controller transfer
Floor sensor possible (optional)
CANopen interface (DS406) for car position and parameter transfer, DS417 and other safe interfaces possible
Scaleable functional safety architecture (e.g. solution for EN 81-A3 functionality with 2 safety relais)
Travel speed up to 10 m/s
Advantages of the magnetic tape technology: insensitive to dirt and smoke, flexible installation
EU-Type examination tested, SIL3 (TÜV-certified)
Floor sensor possible
Quick and easy installation

MEChANICAL DATA

Measuring principle	absolute, redundant
Repeat accuracy	± 1 increment
System accuracy in µm at 20 °C	± (1000 + 100 x L), L= measuring length in meters
Distance sensor/ tape	correct distance is guaranteed by the magentic tape guidance
Housing material	aluminium
Housing dimensions (L x W x H)	354 x 135 x 53 mm
Required magnetic tape	AB20-80-10-1-R-D-15-BK80
Basic pole pitch (magnetic tape)	8 mm
Max. measuring length	260 m
Connections	2 outlets with open wire ends for PIO and SCA cables (plug connectors on request); M12 4 pole male for eSGC; according to ICE 61067-2-101
Sensor cable PIO, SCA	standard length 3 m, others on request
Weight	approx. 1400 g without cable, cable: approx. 60 g per meter

Power supply voltage	18 ... 30 VDC (stabilized) Note: a SELV/PELV power supply must be used!
Residual ripple	< 100 mV
DZO output	+24 VDC - 20%, max. 200 mA (PNP)
Current consumption	max. 600 mA at 24 VDC
Interfaces	CANopen (DS406) or DS417, others on request
Resolution	configurable up to 62.5 µm, default setting: 1 mm
Max. operating speed	10 m/s
Digital input voltage	18 ... 30 VDC for HIGH level; open for LOW level
Relay contact rating OC, SR1, SR2	0 ... 230 VAC (max. 250 VAC), max. 2 A; or 24 VDC (max. 30 VDC), max. 1 A; or 110 VDC, max. 250 mA; each with a resistive/inductive load with L/R < 40 ms
Rating for external supply of SGC-actuator	24 VDC, min. 18 V; max. 30 V; constraints for connected trip coil must be observed

Max. operating time	20 years
Safety relay contact reaction time	< 55 ms
Solid state contact (eSGC) reaction time	< 45 ms

Storage temperature	-25 ... +85 °C
Operating temperature	-20 ... +65 °C, -25 ... +85 °C on request
Humiditiy	95 %, not-condensing
Operating height	max. 2000 m above sea level
Protection class	IP54 (acording to EN 60529), higher on request
Interference emission/ immunity	EN 12015 / EN 12016
Vibration/ shock resistance	EN 60068-2-6, EN 60068-2-27 EN 60068-2-29